Water For Health

Archive for the ‘Water Safe’ Category

Hard water stains can be very difficult to remove with ordinary cleaners, however, with the right approach they are easily eliminated! Using soap and elbow grease is a poor weapon in the fight against lime scale, but with some basic chemistry knowledge it becomes much more obvious how to dissolve those annoying hard water stains in no time at all.

Acids will remove hard water deposits and are typically found in toilet bowl cleaners, rust removers, metal cleaners and kitchen/bathroom cleaners that remove mineral deposits.

Abrasives may scour off stains, and if used regularly, harsh abrasives will gradually scratch the finish of sinks, bathtubs and other items. Coarse abrasives will damage plastic, glass, plated and highly polished metals. Chlorine bleach can help remove stains. However, it can dull shiny finishes of porcelain enamel surfaces.

Abrasive Cleaners

Abrasive cleaners like scouring powder may remove or lighten stains. Regular use of harsh abrasives scratches the finish of sinks, bathtubs, or other fixtures. Once the surface is dull and rough, it will get dirty faster and stain more deeply. Even mild or fine abrasive cleaners may eventually scratch or dull surfaces. Do not use abrasive cleaners on fiberglass, ceramic tile or glass.

Chlorine Bleach

Chlorine bleach can help remove some stains, however, don’t leave it standing for long periods of time, as this will dull shiny porcelain enamel surfaces.

Acid Cleaners

Phosphoric acid is often found in cleaning products that remove hard water deposits. Hydrochloric and sulphuric acids are sometimes used in diluted concentrations in toilet bowl cleaners.

There are some commercial domestic products that scour off stains or use bleach to remove hard water stains and have some major drawbacks, and that is not even taking into account the potentially dangerous products they contain that may harm your children or pets.

The SIMPLE ways to remove hard water stains:

There are some simple ways to remove hard water stains quickly and easily that will remove even the most stubborn stains and make your fixtures and fittings literally sparkle like new!

One of the most overlooked factors when dealing with hard water stains is realizing that they contain either calcium or magnesium. Therefore, they can be tackled by using completely natural acids that are found all around the home, are totally safe to use and could save you hundreds of dollars on expensive cleaning products.

white vinegar and lemon juice! White vinegar, a weak acid, is about 5 percent acetic acid. It will remove hard water deposits from glass, rust stains from sinks, and tarnish from brass and copper, and works perfectly all around the home when combined with the correct ingredients. Lemon juice, another weak acid, contains citric acid, which can be used in much the same way as vinegar.

By using these simple, natural ingredients that are found all around the home – and in some cases combining them with other natural products for really stubborn stains, it is possible to remove limescale and water stains cheaply and in a way that doesn’t harm our planet.

Warm Regards, Patrick Henry

HardWaterStainsTips

Visit our popular website at http://www.hardwaterstainstips.com

Email us with any questions or queries at support@hardwaterstainstips.com

In a country plentiful with the basic essentials, there are certain things we take for granted. Among them is the cleanliness of our water. Most of us turn on our kitchen taps and think nothing of grabbing a drink straight from the sink. And in many cases, this may be perfectly safe. But, it’s important to note that the toxins that water carry are invisible to the naked eye. So it’s often impossible to know if the water we are drinking is clean and safe. For this reason, a drinking water purification system put into place can bring enormous peace of mind.

In America today we are used to a certain amount of chemicals in our food. Processed foods contain a bevy of additives to which we normally give little thought. But as the public consciousness turns towards organic foods and other ways to eliminate chemicals from our food, we invariably turn a discerning eye to our water supply. The truth is that contaminants are contained in much of the water that we drink. But a drinking water purification system can filter much of these toxins from our water.

A drinking water purification system can be found for any size water supply. There are large, complex systems that can purify large supplies of water. There are also smaller drinking water purification systems that work within in the home in a number of capacities. For instance, a compact drinking water purification system can fit right under your kitchen sink and filter through water that comes through that particular pipe. As many people take a drink of water straight from the kitchen sink, this may be an appropriate place for drinking water purification. Other systems can fit right over your tap and cleanse water as it comes out. The pricier models, of course, tend to be more complex and are able purify a larger percentage of toxins from the water.

There are even portable drinking water purification systems that travelers can take on the road. This is especially helpful when visiting countries where the water supply is suspect.

The most important factor to bear in mind when looking at how to purify tap water, is to find out which systems will do it effectively and not still leave you with dangerous contaminants in your water.

With over two thousand toxins in our drinking water, including prescription drugs and herbicides, now is the right time to protect your health and learn how to purify tap water with the right product.

The best way is to check the manufacturers performance data sheet to see exactly what they can remove. Make sure that this is made available to you.

Many out there are simply old technology, like distillation and reverse osmosis systems, designed for industries which needed large quantities of demineralized water.

The problem is they remove essential minerals which we need to stay healthy, such as calcium and potassium, a fact which is also stated by the World Health Organization.

In addition to this, though effective at removing chlorine, they leave in many of the more dangerous toxins, so you are still at risk. They also waste large quantities of water and are expensive to maintain, so not a good example of how to purify tap water.

The most effective ones, which the US EPA recommends are carbon block, multi-stage filtration systems. These have been proven to remove 99% of all contaminants present, and keep in those essential minerals.

These will leave you with great tasting, healthy water with none of the ever increasing health risks. You can choose from a countertop, under the counter or even a whole house system.

Remember, you are exposed to the toxins when you shower as well, even more so than by drinking water as your pores open and absorb the vaporized toxins more easily.

We need to take a long hard look at the quality of the water we use, and make sure we protect ourselves and our family’s health with a view to the long term.

I hope this quick guide on how to purify tap water will help to point you in the right direction, and if you would like to learn more about the types of home filtration systems that I personally recommend and use, visit my website today.